PRAG 10KVA-48V INVERTER-WALL MOUNT-V + AC/DC CABLES
PRAG 10KVA-48V INVERTER-WALL MOUNT-V + AC/DC CABLES
NGN2,260,500.00
Availability:
In stock
Out of stock
SKU
DELUXE-V1601912509
Brand
Weight
68 kg

Product Description

PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today.

PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.

PRAG 10KVA 48V INVERTER Features

  • Powerful Pure Sine Wave (PSW) Inverter/Charger
  • 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
  • High efficiency design and Power Saving Mode to conserve energy
  • 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
  • 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
  • 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
  • 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
  • Battery DOD (Depth of Discharge) setting from 50%
  • Easy and straightforward installation
  • Designed to operate under harsh environment
  • DC Start and Automatic Self Diagnostic (ASD) function
  • Compatible with Linear and Non-Linear loads
  • Low DC Voltage home and office appliances support
  • Up to 120Amp charging current selectable from 0%-100%
  • Battery priority mode for preferred UPS configuration
     
    Inverter Output
    Model PT-INV-10KVA/9000W 48V-Color LED, Wall-H
    Continuous Output Power 9000W
    Surge Rating(20s) 24000W
    Capable of Starting Electric Motor 8HP
    Output Waveform Pure Sine wave/Same as input(Bypass mode)
    Nominal Efficiency >88%(Peak)
    Line Mode Efficiency >95%
    Power Factor 0.9-1.0
    Nominal Output Voltage rms  220-230-240Vac
    Output Voltage Regulation ±10% RMS
    Output Frequency 50± 0.3Hz/60± 0.3Hz
    Short Circuit Protection Yes, Current Limit Function (Fault after 1sec)
    Typical transfer Time 10ms(Max)
    THD < 10%
    DC Input
    Nominal Input Voltage 12.0Vdc
    ( *2 for 24Vdc, *4 for 48Vdc)
    Minimum Start Voltage 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
    Low Battery Alarm 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
    Low Battery Trip 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
    High Voltage Alarm & Fault 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
    High DC Input Recovery 15.5Vdc
    Low Battery voltage recover 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
    Idle Consumption-Search Mode < 25 W when Power Saver On
    Charge
    Input Voltage Range Wide: 90~135VAC / 164~243VAC
    Narraw: 100~135VAC / 194~243VAC
    Input Frequency Range Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
    Output Voltage Depends on battery type
    Charger Breaker Rating 40A
    Max Charge Rate 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
    Over Charge Protection Shutdown 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
    Charger curve(4 stage constant current)
    4 step digital controlled progressive charge
    Battery types ( *2 for 24Vdc, *4 for 48Vdc)
    Battery type Float Vdc
    Gel U.S.A 13.7
    A.G.M 1 13.4
    A.G.M 2 13.7
    Sealed Lead Acid 13.6
    Gel Euro 13.8
    Open Lead Acid 13.3
    Calcium 13.6
    De-sulphation 15.5 for 4hrs
    Remote Control Yes. Optional
    Bypass & Protection
    Input Voltage Waveform Sine wave (Grid or Generator)
    Nominal Voltage 220Vac
    Low Voltage Trip 184V/140V±4%
    Low Voltage re engage 194V/150V±4%
    High Voltage Trip 253V/270V±4%
    High Voltage re engage 243V/260V±4%
    Max Input AC Voltage 280VAC
    Nominal Input Frequency 50Hz or 60Hz (Auto detect)
    Low Freq Trip Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
    Wide:40±0.3Hz for 50Hz/60Hz
    Low Freq re engage Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz
    Wide:42±0.3Hz for 50Hz/60Hz
    High Freq Trip Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
    Wide: 70±0.3Hz for 50Hz/60Hz
    High Freq re engage Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz
    Wide: 68±0.3Hz for 50Hz/60Hz
    Output Short circuit protection Circuit breaker
    Bypass breaker rating 63A
    Transfer switch rating 80amp for UL
    Max bypass current 80amp
    Mechanical Specification
    Mounting Wall mount
    Inverter Dimensions(L*W*H) 588*415*200mm
    Inverter Weight 66KG
    Shipping Dimensions(L*W*H) 750x520x310mm
    Shipping Weight 68KG
    Display Status LEDs / Status LEDs+LCD