Call To Order
MERCURY 650VA UPS (ZI)
NGN53,805.38
Availability:
In stock
Out of stock
Weight
6 kg
Product Description
|
Specification
| Input voltage | 220VAC |
| Input frequency | 50Hz |
| Input phase | Single phase |
| Input socket | With Fuse |
| Cold Start (0 to 100% load) | Press the ON/OFF switch |
| Input range (220V) | 140V-300V |
| Rating output (VA). | 650VA |
| Rating output (W). | 390W |
| Rating output (W). | Battery mode(simulated sine wave), AC mode (sine wave) |
| Power factor | 0.6 |
| Rating voltage | 220V |
| Output range | 220Vac-7%+15% ( in battary mode ) |
| Rear Output Socket | 2xUniversal – Battery backup |
| Transfer time | TYPICAL 4-8 ms |
| Communication Interface | NIL |
| Rating frequency | 50Hz |
| Output Frequency Line-mode | Synchronize with the Utility |
| Battery mode | 50 Hz±1Hz |
| Output Frequency Line Mode | Synchronize with the utility |
| Short Circuit Protection Line Mode | FUSE & firmware protection |
| Battery Mode | Software protection controlled by firmware |
| Overload Protection Line Mode | 110%+-5% (Go to fault mode after 5 minutes), 120%+-5% (Go to fault mode immediately) |
| Battery Mode | 110%+-5% (Shutdown after 5 minutes) 120%+-5% (Shut down immediately) |
| Rating frequency | 12V/8.2AH x 1 |
| Backup Tim – Typical | 10mins to 18mins (depending on load) |
| Charge Current | About 1A at normal mode |
| Over Charge Protection | >14.5V +/- 0.2V stop charging <13.5V +/- 0.5V Recharge |
| Weight | 5.6kg +/- 0.3Kg |
| Dimension | 390x 145 x 220 (mm) |